Design
Architectural services were supplied by Scotland-based RMJM, from initial designs by Nicoll Russell Studios and engineers Binnie Black and Veatch.[2] The main project architect was an RMJM architect named Tony Kettle.
Bachy/Soletanche and Morrison Construction Joint Venture won the contract to design the wheel and receiving basin, a new section of canal, a tunnel beneath the Antonine wall and a section of aqueduct. In turn the Joint Venture appointed Butterley Engineering to design and construct the wheel. Butterley undertook all construction work for the wheel and set up its own team to carry out the design work. This team comprised Tony Gee and Partners, to undertake the structural design responsibilities and M G Bennett & Associates to design the mechanical and electrical equipment for the wheel.
The wheel has an overall diameter of 35 metres (115 ft) and consists of two opposing arms which extend 15 metres beyond the central axle and take the shape of a Celtic-inspired, double-headed axe. Two sets of these axe-shaped arms are attached about 25 metres (82 ft) apart to a 3.5 metres (11 ft) diameter axle. Two diametrically opposed water-filled caissons, each with a capacity of 80,000 imperial gallons (360,000 l; 96,000 US gal), are fitted between the ends of the arms.
These caissons always weigh the same whether or not they are carrying their combined capacity of 600 tonnes (590 LT; 660 ST) of floating canal barges as, according to Archimedes' principle, floating objects displace their own weight in water, so when the boat enters, the amount of water leaving the caisson weighs exactly the same as the boat. This keeps the wheel balanced and so, despite its enormous mass, it rotates through 180° in five and a half minutes while using very little power. It takes just 22.5 kilowatts (30.2 hp) to power the electric motors, which consume just 1.5 kilowatt-hours (5.4 MJ) of energy in four minutes, roughly the same as boiling eight kettles of water.
The wheel is the only rotating boat lift of its kind in the world, and is regarded as an engineering landmark for Scotland. The United Kingdom has one other boat lift: the Anderton boat lift in Cheshire. The Falkirk Wheel is an improvement on the Anderton boat lift and makes use of the same original principle: two balanced tanks, one going up and the other going down, however, the rotational mechanism is entirely unique to the Falkirk Wheel.
Since 2007 the Falkirk Wheel has featured on the obverse of the new series of £50 notes issued by the Bank of Scotland. The series of notes commemorates Scottish engineering achievements with illustrations of bridges in Scotland such as the Glenfinnan Viaduct and the Forth Rail Bridge.
Operation
The wheel rotates together with the axle, which is supported by four-metre-diameter slewing bearings that are fitted to the ends of the axle and have their outer rings mounted on the plinths, which in turn are constructed on top of piled foundations.
The slewing bearing at the machine-room end of the axle has an inner ring gear which is configured to act as a rotating annulus. The rotating annulus is driven by ten hydraulic motors which are assembled on a stationary bearing and motor assembly known as the planet carrier which in turn is also mounted onto a plinth similar to the one at the other end of the axle. The drive-shafts of the motors have pinion gears which act as stationary planetary gears in this train of gears and engage the rotating annulus ring gear. An electric motor drives a hydraulic pump which is connected to the hydraulic motors by means of hoses and drive the wheel at 1/8 revolution per minute.
Costs and prices
The Falkirk Wheel cost £17.5 million, and the restoration project as a whole cost £84.5 million (of which £32 million came from National Lottery funds).
The Falkirk Wheel Visitor Centre offers scheduled one-hour, round trip boat tours, called "The Falkirk Wheel Experience", that include passage on the wheel. The tours start below the wheel in the Forth & Clyde Canal, ascend via the wheel to the Union Canal, visit nearby areas on the Union Canal, and then return. As of 2010[update], the boat tour costs £7.95 for adults, £4.95 for children aged 3–15 (free for children under 3), OAP concession £6.95, student/state benefits concession £6.95, and family price of £23.24 (2 adults and 2 or more children -10% discount) with a discount of 10% for a group of 20 or more
(Thanks to Wikipedia, the free encyclopedia)
No comments:
Post a Comment